Tell you how to avoid deformation of DC plug molds in manufacturing?

Tell you how to avoid deformation of DC plug molds in manufacturing?

　　 1. The thickness of the mold is made as uniform as possible to prevent the occurrence of accuracy prohibition due to uneven thickness of the mold.

　　 2. Make the temperature of each part of the DC plug mold cavity uniform to prevent warpage due to different flow directions and shrinkage rates, and try to eliminate the problems of density difference, pressure difference and temperature difference in the cavity.

　　 3. During the process of making the mold, the DC plug mold should be accurate enough, with excellent mold release, injection pressure, and the ejection system to maintain balance.

　　 4. In the process of making DC plug mold, the exhaust should be outstanding.

　　 5. The strength of the materials used by the DC plug molds of DC plug mold manufacturers is lacking, and higher strength materials should be replaced.

　　 6. During the process of making the mold, the machine tool should pay attention to the change of the DC plug mold to prevent the possibility of mold deformation due to operational errors.

　　 7. If the technology of the DC plug mold made by the manufacturer is too strong, it will not happen that the mold is deformed during the manufacturing process.