Dongguan Haochen Mould Factory
Contact: Mr. Li
Mobile phone: 0086+13922512135
Q Q: 89180037
Q Q: 2649528748
Phone: 0086769-83511708
Phone: 0086769-83511798
Fax: 0086769-83511508
Email: liwei@haochenmj.com
Website: www.haochenmj.com/en
Address: No. 58, Lishi Industrial Zone, Huangjiang Town, Dongguan City
Plastic mold hot runner mold Plastic terminal injection mold
Mainly includes a concave mold with a variable cavity composed of a concave mold combined substrate, a concave mold assembly and a concave mold combined card board, a convex mold combined substrate, a convex mold component, a convex mold combined card board, a cavity cutting component and A punch with a variable core composed of side-section combined plates. Coordinated change of mold convex, concave mold and auxiliary forming system. It can process a series of plastic parts of different shapes and sizes.
In order to improve the performance of plastics, it is necessary to add various auxiliary materials to the polymer, such as fillers, plasticizers, lubricants, stabilizers, colorants, etc., in order to become good performance plastics.
1. Synthetic resin is the most important component of plastic, and its content in plastic is generally 40% to 100%. Because of the large content, and the nature of the resin often determines the nature of the plastic, people often think of resin as a synonym for plastic. For example, mix polyvinyl chloride resin with polyvinyl chloride plastic, phenolic resin and phenolic plastic. In fact, resin and plastic are two different concepts. Resin is an unprocessed raw polymer, which is not only used to make plastics, but also as a raw material for coatings, adhesives and synthetic fibers. In addition to a very small part of plastic containing 100% resin, most plastics, in addition to the main component resin, also need to add other substances. 2. Filler filler is also called filler, it can improve the strength and heat resistance of plastics and reduce costs. For example, adding wood powder to phenolic resin can greatly reduce the cost, making phenolic plastic one of the cheapest plastics, while also significantly improving the mechanical strength. Fillers can be divided into organic fillers and inorganic fillers, the former such as wood flour, rags, paper and various fabric fibers, the latter such as glass fiber, diatomaceous earth, asbestos, carbon black and so on.
3. Plasticizers Plasticizers can increase the plasticity and flexibility of plastics, reduce brittleness, and make plastics easy to process. Plasticizers are generally miscible with resins, non-toxic, odorless, light- and heat-stable, high-boiling organic compounds. The most commonly used are phthalates. For example, in the production of PVC plastics, soft PVC plastics can be obtained if more plasticizers are added, and hard PVC plastics can be obtained if no or less plasticizers are added (amount <10%). .
4. Stabilizers In order to prevent the synthetic resin from being decomposed and destroyed by light and heat during processing and use, and to extend the service life, stabilizers should be added to the plastic. Commonly used are stearate and epoxy resin.
5. Colorants Colorants can make plastics have various bright and beautiful colors. Commonly used organic dyes and inorganic pigments as colorants.
6. The role of the lubricant is to prevent the plastic from sticking to the metal mold during molding, and at the same time make the plastic surface smooth and beautiful. Commonly used lubricants include stearic acid and its calcium and magnesium salts. In addition to the above additives, flame retardants, foaming agents, antistatic agents, etc. can also be added to the plastic.
Phone: 0086769-83511708 / 0086-13922512135
Email: liwei@haochenmj.com
Address: No. 58, Lishi Industrial Zone, Huangjiang
Town, Dongguan City
扫一扫,查看手机