Dongguan Haochen Mould Factory
Contact: Mr. Li
Mobile phone: 0086+13922512135
Q Q: 89180037
Q Q: 2649528748
Phone: 0086769-83511708
Phone: 0086769-83511798
Fax: 0086769-83511508
Email: liwei@haochenmj.com
Website: www.haochenmj.com/en
Address: No. 58, Lishi Industrial Zone, Huangjiang Town, Dongguan City
What do DC plug molds want to do without deformation?
1. The thickness of the manufacturing mold is as uniform as possible to avoid the occurrence of inaccurate accuracy due to the uneven thickness of the mold.
2. Make the temperature of each part in the dc mold cavity uniform, avoid warpage caused by different movement directions and shortening rates, and try to eliminate the problems of density difference, pressure difference, temperature difference and so on in the cavity.
3. In the process of manufacturing the mold, the dc mold should be accurate enough, with excellent demoldability, injection pressure, and the ejection system to maintain balance.
4. In the manufacturing process of dc mold, the exhaust should be excellent.
5. The strength of the materials used by dc mold manufacturers' dc molds is lacking, and higher intensity materials should be replaced.
6. During the process of manufacturing the mold, the machine tool should pay attention to the changes of the dc mold to avoid the possibility of mold deformation due to operational errors.
7. If the manufacturer's skills in manufacturing dc molds are too strong, it will not happen that the molds are deformed during the manufacturing process.
Phone: 0086769-83511708 / 0086-13922512135
Email: liwei@haochenmj.com
Address: No. 58, Lishi Industrial Zone, Huangjiang
Town, Dongguan City
扫一扫,查看手机