The data line plug mold teaches you the "mold processing" content summary

The data line plug mold teaches you the "mold processing" content summary

     Mold making (Mold Making) refers to the processing of forming and blank making tools, in addition to cutting dies and die-cutting dies. Normally, the mold consists of an upper mold and a lower mold. The steel plate is placed between the upper and lower molds, and the material is formed under the effect of the press. When the press is turned over, the workpiece confirmed by the shape of the mold will be obtained or the corresponding scrap will be removed. As small as electronic connectors and as large as car instrument panel parts can be molded with a mold.

　　 Progressive die refers to a set of molds that can actively move the processed workpiece from one station to another station and obtain the molded parts in one station. Mold processing technology includes: cutting die, blanking die, compound die, extrusion die, four slide rail die, progressive die, stamping die, die cutting die, etc.

　　Mold varieties

　　1) Metal stamping die: continuous die, single die, compound die, tensile die data line plug die　　

(2) Plastic forming die: injection die, extrusion die, suction die

　　 (3) Die-casting mold

　　 (4) Casting mold

　　 (5) Powder metallurgy mold

　　 (6) Rubber mold

　　Mold processing flow

　　Cut material: front mold material, rear mold material, insert material, line material, inclined roof material;

　　 Open frame: front mold frame, rear mold frame;

　　Crossing: the front mold cavity is thick, the rear mold cavity is thick, and the parting line is thick;

　　Bronze male: front mold copper male, rear mold copper male, parting line clear copper male;

　　 Line cutting: insert parting line, copper male, inclined top pillow position;

　　Computer gong: fine gong parting line, mold core after fine gong;

　　 EDM: thick front mold, copper male, male mold line angle clearance, rear mold bone position, pillow position;

　　 Drilling, pinhole, thimble; mold thimble hole waterway hole processing line position, line position pressure pole;

　　 Slanted top, compound thimble, with thimble.

　　 1) Chisels, code pits, garbage nails (limit nails);

　　 (2) Flying model;

　　 (3) Nozzle, brace, spring, water transportation;

　　 (4) Bone position of mold saving, polishing, front mold and back mold;

　　 (5) Fine water structure, tie rod screw hook, tension spring

　　 (6) Heat treatment, quenching, surface nitriding of important parts;